| |
 EMC Testing of Commercial Products
EMC Integrity, Inc. has the ability to test a wide range of commercial products, from battery-powered, handheld meters to electrosurgical generators to data storage libraries with 100’s of terabytes of storage capacity. One of the many advantages of testing at EMCI is the fact that full-compliance emissions and immunity testing is performed under one roof. Historically, commercial EMC testing has entailed testing emissions at an OATS, tearing down, packing up, shipping product, unpacking, re-assembling and testing immunity at the immunity test site. At EMC Integrity, the transition between emissions and immunity is as simple as moving the test article from one test area to another.
EMCI has been accredited for European Union (EU) compliance testing since January of 1997. We are audited annually to ISO 17025: 2005. Markets that we service are generally broken down as follows:
EMCI’s testing capabilities for commercial products include, but are not limited to, the following:
| Emissions |
Reference Standard(s) |
|
Radiated E-field Emissions (30 MHz to 40 GHz)
|
FCC Part 15
FCC Part 18
EN 55011 / CISPR 11
EN 55022 / CISPR 22
EN 61000-6-3
EN 61000-6-4
CNS 13438: 2006
KN22
AS/NZS CISPR 22: 2006
VCCI
|
|
Radiated H-field Emissions (9 kHz to 30 MHz)
|
FCC Part 15
EN 55011 / CISPR 11
|
|
Conducted Emissions (150 kHz to 30 MHz)
|
FCC Part 15
FCC Part 18
EN 55011 / CISPR 11
EN 55022 / CISPR 22
EN 61000-6-3
EN 61000-6-4
CNS 13438: 2006
KN22
AS/NZS CISPR 22: 2006
VCCI
|
|
AC Power Line Harmonics
|
EN 61000-3-2 / IEC 61000-3-2
|
|
AC Power Line Flicker
|
EN 61000-3-3 / IEC 61000-3-3
|
|
Immunity
|
|
|
Electrostatic Discharge
Radiated RF Immunity
Electrical Fast Transient Immunity
Surge Immunity
Conducted RF Immunity
Power Frequency H-field Immunity
Power Quality Failure
|
EN 61000-4-2 / IEC 61000-4-2 / KN 61000-4-2
EN 61000-4-3 / IEC 61000-4-3 / KN 61000-4-3
EN 61000-4-4 / IEC 61000-4-4 / KN 61000-4-4
EN 61000-4-5 / IEC 61000-4-5 / KN 61000-4-5
EN 61000-4-6 / IEC 61000-4-6 / KN 61000-4-6
EN 61000-4-8 / IEC 61000-4-8 / KN 61000-4-8
EN 61000-4-11 / IEC 61000-4-11 / KN 61000-4-11
|
In addition to these formal tests, EMCI can perform an engineering-level evaluation on any of the tests listed above. EMCI’s expertise in test engineering, coupled with our ability to perform MIL-STD testing, also gives us the latitude to perform many other non-standard tests which may be required by a client or other procuring agency. Some of these tests include:
Conducted emissions, 10 Hz to 400 MHz
Conducted susceptibility, 10 kHz to 1 GHz (various injection methods)
Radiated E-field emissions, 10 Hz to 40 GHz
Radiated H-field emissions, 10 Hz to 30 MHz
Radiated E-field susceptibility, 10 kHz to 40 GHz
Radiated H-field susceptibility, 10 Hz to 3 kHz @ 400 A/m, at lower levels to 100 kHz
|
|
